I just got a Moog Minitaur, and I
made this version to use the Minitaur as an external analog filter. Filter mode is set to "Bypass" by default, and the filter mode will
not change when you change preset like it does in the standard version. The Minitaur has a very hot input, so the ouput level is set to
just 10% compared to the standard version. I set the Minitaur cutoff knob to 40% to get the sound right, so you might have to test different cutoff setting
on your hardware synthesizer. It should work with Minimoog, Little phatty, Microzwerg, Minibrute and so on.
It has the same VST-id as the standard version, so in some hosts you can have both versions installed at the same time,
in some hosts only one of them will show up.
In filter mode "bypass" audio is sent to right output, and filter cutoff (knob, envelopes, velocity, kb-tracking for highest note) is sent to left output.
When using it with Minitaur I have to use max output level from my soundcard to get strong enough cutoff (It has the range 0-5V). There
is a new knob to set the overall cutoff sent to left ouput:
NEWS IN Messiah 1.3 R13:
NEWS IN Messiah 1.3 R11:
NEWS IN Messiah 1.3 R10:
NEWS IN Messiah 1.3 R9:
NEWS IN Messiah 1.3 R8:
NEWS IN MEMORYMOON VERSION 1.8R8:
NEWS IN ME80 VERSION 1.2R6:
BIG NEWS:
CONTROLLER TEMPLATES FOR: AKAI MPK49, ROLAND A300, ROLAND A500, ROLAND A800, ROLAND PCR300, ROLAND PCR500, ROLAND PCR 800, NOVATION REMOTE, NOVATION REMOTE SL and NOVATION SL Mk2
uploaded to the download page. CC number pictures updated.
Messiah, memorymoon and ME80 updated. The current download links are still valid.
NEWS IN Messiah 1.3 R7:
NEWS IN MEMORYMOON VERSION 1.8R7:
NEWS IN ME80 VERSION 1.2R5:
Messiah and memorymoon updated. The current download links are still valid.
NEWS IN Messiah 1.3 R6:
NEWS IN MEMORYMOON VERSION 1.8R6:
NEWS IN ME80 1.3 R4:
NEWS IN Messiah 1.3 R5:
NEWS IN MEMORYMOON VERSION 1.8R5:
NEWS IN ME80 VERSION 1.3R3:
NEWS IN Messiah 1.3 R4:
NEWS IN Memorymoon 1.8 R4:
NEWS IN ME80 1.2 R2:
NEWS IN MESSIAH VERSION 1.3R3:
NEWS IN MEMORYMOON VERSION 1.8 R3:
I have got returned mail from these users: caesarg86, jimsand8, fuzdref2004, daniel.ducroq, tarik_haque, gothluke, unoriginaldan, pherasimchuk, michael.branding, slinnsys.co.uk, jasnoch, betonkopfmedia, schuch.pay, aliceadsl.fr and mikelcarrion.
NEWS IN MEMORYMOON VERSION 1.8:
NEWS IN MESSIAH VERSION 1.3:
NEWS IN ME80 VERSION 1.2:
I have done a big cleanup in Memorymoon and Messiah and deleted a lot of parameters that was just used for conversion. Because of that you will get some error messages like: "159 parameters could not be loaded". Just click OK. All patches will load fine, all those parameters were not used for anything important. The good news is that this cleanup will cause faster loading times.
The new Messiah skin by Scott Kane was finished today.
News in memorymoon 1.7:
21.11.09
Novation controller templates for memorymoon and messiah uploaded on the download page. (Not for the novation mk2 series).
Next memorymoon version will have note-on CPU reduced by 18%, and general CPU 1% lower. Envelope retrigger modes will be changed, and missing notes fixed.
Changes in memorymoon v1.6
Changes in Messiah v1.2