memorymoon

memorymoon

Using hardware controllers to control ME80.

Right click any slider, then move your hardware controller slider to do midi-learn. Or you can select midi CC number from a list.

CC setup is saved in banks and single patches. You can also save the CC setup seperately from the file button.


Current pre-set CC numbers:

CC1 Mod wheel

CC2 Breath control (routed to the aftertouch system inside the synth).

CC7 Master volume

CC11 Expression pedal. Routed to the Wah section in ME80. There is a selector in ME80 to select exp, wah or exp+wah.

The wah-knob is simply a monitor for the expression pedal, it will move when you move the exp pedal. You can right-click to set it to another value than CC11 or unlearn it. It is very useful for instance if you have no sound, then you can look at the wah/exp-knob and see its position.

CC25 pre EQ mid band freq (can be unlearned).EQ band CC's are pre-set for the Novation Launchpad mini knobs 5,6,7,8.

CC26 pre EQ mid band gain (can be unlearned).

CC27 post EQ mid band freq (can be unlearned).

CC28 post EQ mid band gain (can be unlearned).

CC64 Normal Sustain pedal , or longer release when the "Sustain foot switch" is activated, and portamento off/on when the "Portamento foot switch" is activated.

CC69 (avoid this , used for sustain pedals in many controllers)

CC120(avoid this - all sounds off)


memorymoon